Heat Pump Cooling & Heating Repair and Service

Heat pumps provide both cooling in summer and heating in winter by reversing the flow of refrigerant using an electro-mechanical reversing valve. Because heat pumps operate year-round, components experience twice the operational hours of standard air conditioning systems, making proper maintenance and diagnostics critical.

Heat pumps provide both cooling in summer and heating in winter by reversing the flow of refrigerant using an electro-mechanical reversing valve. Because heat pumps operate year-round, components experience twice the operational hours of standard air conditioning systems, making proper maintenance and diagnostics critical.

Common Symptoms

Heat pump blowing hot air while set to COOL mode

Reversing valve solenoid de-energized or stuck in the heating position, or faulty O/B thermostat terminal wiring.

Outdoor unit encrusted in solid thick ice during winter

Malfunctioning defrost control board, bad defrost temperature sensor, or failed outdoor fan motor preventing defrost cycling.

Auxiliary/Emergency heat indicator light staying on continuously

Heat pump compressor locked out, low outdoor ambient temperature, or system running inefficient electric resistance strips.

Diagnostic Considerations

Reversing Valve Solenoid & Body Analysis

Testing 24V energization to the reversing valve coil and measuring slide temperatures to detect internal refrigerant bypass.

Defrost Cycle Initiation & Termination Check

Testing demand-defrost thermistors, sensor resistance, and defrost relay contact engagement.

Crankcase Heater & Inverter Diagnostics

Verifying crankcase heater operation to prevent refrigerant migration into compressor oil during cool off-cycles.

Service Process

01 — Refrigerant Flow & Mode Reversal Check

Switching system between heating and cooling to observe reversing valve shuttle movement and pressure differential shifts.

02 — Auxiliary Heat Strip & Sequencer Testing

Measuring amperage across electric heat banks to verify proper staging without unnecessary power consumption.

03 — Defrost Logic Verification

Simulating defrost initiation to confirm outdoor fan shutdown and temporary supplemental heat engagement.

04 — Seasonal Charge Optimization

Verifying critical charge by weight or target subcooling to ensure balance in both cooling and heating cycles.

Homeowner Safety Checks

When to Call a Professional

Frequently Asked Questions

How is a heat pump different from a standard air conditioner?

In cooling mode, a heat pump functions identically to a conventional air conditioner by absorbing heat from indoor air and rejecting it outdoors. The key difference is a 4-way reversing valve that allows the refrigerant flow to reverse in winter, extracting ambient heat from outdoor air and pumping it inside.

Why does my heat pump need service twice a year?

Unlike standard air conditioners that rest during autumn and winter, heat pumps run virtually all year long. A spring service prepares the system for intensive cooling, while a fall tune-up inspects the reversing valve, defrost controls, and auxiliary heat strips.

Need AC Repair in Your Area?

Call (888) 672-2966 for fast phone assistance.

Call (888) 672-2966